Superon E7018

Superon E7018 is a low-hydrogen covered electrode for SMAW welding on carbon steel, aimed at structural fabrication, equipment maintenance, part repair and joints where the industrial buyer needs a consumable classified under AWS A5.1 E7018. At SoldaForce this page focuses on the Superon reference, different from the Lincoln Electric, Stanvac and West Arco pages that share classification but not brand. The main value is selecting the electrode type correctly: E7018 for structural low-hydrogen deposit, E7018-1 when the project specification requires higher impact performance and E8010-G when the need is pipe welding with a high-penetration cellulosic electrode. Availability, package and certificates are confirmed in the quote; measurements or electrical ranges not present in the lot data are not assumed.

Selection guide

• Standard: AWS A5.1 E7018.
• Brand: Superon, distributed by SoldaForce subject to availability.
• Application: structural carbon steel and industrial maintenance.
• Unit: kilogram or package depending on product.

Use recommendations

• Select the available diameter according to the WPS and equipment capacity.
• Keep the electrode protected from moisture before and during the shift.
• Clean slag between passes to avoid inclusions.
• Validate preheat and thermal control if the steel or thickness requires it.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for Superon E7018 with SoldaForce and ask for the available package for your site or shop.