600 Hardfacing Electrode is a covered electrode (SMAW process) by Genérico importado, classification DIN 8555 E6-UM-60, for hardfacing. In stock; diameter, package and price are confirmed in the quote.
In stock — state diameter, package and quantity when requesting a quote and an advisor confirms the price.
| Standard | DIN 8555 E6-UM-60 |
| Process | SMAW |
| Model | 600 |
| Brand | Genérico importado |
| Base material | recargue duro |
| Type | Rebuild & hardfacing |
600 Hardfacing Electrode is a SoldaForce electrode for overlaying surfaces exposed to abrasion, metal-to-metal friction and wear in tooling or moving equipment. It is intended for industrial buyers who need to identify the correct consumable by classification, material and application, without confusing it with related catalog references. The filler material or family is hardfacing, and its key difference is its hard final rebuilding deposit, different from 350 HB or 450 hardfacings used for more machinable rebuilding. Its normative reference is DIN 8555 E6-UM-60, used as the consumable classification; the final application must be tied to the WPS, base metal and required inspection. For an accurate quote, provide the required diameter, packaging, quantity, base metal, welding position, joint type, expected inspection and whether the job has a qualified procedure. We do not publish single amperage, hardness or strength parameters out of context because they depend on the manufacturer's data sheet, diameter, polarity, preparation, storage, welder technique and actual service conditions.
| Technical data | Honest value for quotation |
|---|---|
| Classification | DIN 8555 E6-UM-60 |
| Material family | hardfacing |
| Sales unit | kilogram or packaging according to product |
| Critical selection | Diameter, position, polarity, WPS, base metal and storage condition |
The values in this table are nominal reference data. Before using them in engineering decisions, review the technical notice at the end of this page and your project's welding procedure specification (WPS).
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this 600 hardfacing electrode, indicating diameter, kilograms or packaging, brand if applicable, application and delivery city to confirm availability and price.
The price depends on diameter, packaging, brand when applicable, quantity and availability. SoldaForce quotes with those details to avoid sending the wrong consumable.
Hardfacing 600 is used as a hard layer against wear; 350 HB is chosen when a tougher rebuilding or base layer is needed before harder layers.
Remove fatigued material, preheat only if the procedure requires it and limit dilution with controlled beads.
Send AWS or DIN classification, diameter, kilograms or packaging, brand if applicable, base metal, welding position, city and whether the project requires a certificate.
It should not be done without reviewing the WPS, base metal, required properties, polarity, heat treatment and approval from the technical lead.
Yes. SoldaForce dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Updated: July 9, 2026
