ESAB ER70S-6

ESAB ER70S-6 is a solid MIG wire for GMAW welding of carbon steel, classified under AWS A5.18 ER70S-6. It is used in metal fabrication, maintenance, assembly, bodywork, light structures and production where continuous feeding and a clean bead with shielding gas are desired. The difference from E71T-1 is central: ER70S-6 is not flux-cored, does not generate slag like FCAW and depends on gas, surface preparation and MIG equipment parameters. Compared with SuperArc L-56, Superon ER70S-6 or West Arco WA 70S-6, this page corresponds to ESAB brand, useful when the project requires that brand or when the shop wants to maintain a specific reference in inventory.

Selection guide

• Process: select ER70S-6 for GMAW/MIG with compatible shielding gas.
• Standard: specify AWS A5.18 ER70S-6 to avoid confusion with flux-cored wires.
• Material: use it on carbon steels compatible with the approved procedure.
• Purchase: confirm packaging, availability and whether lot certificates are required.

Use recommendations

• Check that the machine is configured for solid MIG wire, not flux-cored wire.
• Clean grease, paint, loose rust and moisture before welding.
• Verify shielding gas, flow rate, polarity and wire feed speed according to WPS.
• Keep liner, contact tip and rollers in good condition for stable feeding.

SoldaForce distributes ESAB ER70S-6 for shops, maintenance and fabrication with the MIG process. We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp indicating AWS A5.18, ESAB brand, quantity and city.