Superon ER70S-6

Superon ER70S-6 is a solid MIG wire for GMAW welding of carbon steel, classified under AWS A5.18 ER70S-6. It is used in fabrication, maintenance, assembly and repair shops where a MIG process with continuous feeding and shielding gas is required. It differs from Superon E71T-1 because ER70S-6 is not flux-cored: it has no flux core, does not leave equivalent slag and must be worked with the GMAW-specific setup. Compared with ESAB, Lincoln Electric or West Arco in the same classification, Superon can be quoted as a specific brand as long as the welding procedure or buyer accepts it. For a correct purchase, indicate brand, AWS standard, packaging and whether traceability is required.

Selection guide

• Type: ER70S-6 solid MIG wire for carbon steel.
• Standard: corresponds to AWS A5.18, different from AWS A5.20 used for flux-cored wires.
• Application: suitable for GMAW when base material and WPS permit it.
• Purchase: confirm available packaging and quantity before scheduling production.

Use recommendations

• Use shielding gas and parameters defined by the procedure.
• Verify that the wire feeds without skips from spool to contact tip.
• Avoid welding over paint, oil or moisture.
• Protect the spool from dust and spatter during the shift.

SoldaForce quotes Superon ER70S-6 for companies requiring MIG wire by brand and AWS classification. We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp with quantity, packaging and destination.